Potassium peroxymonosulfate

53 g

Sodium dodecylbenzene sulphonate

15 g

Sulfamic acid

6 g

Excipients

q.s. to 100 g

Surface Disinfection

Dilution Rate

Application

Routine Disinfection for all surfaces, earth, wood, and concrete

1:100 (10 g of the product to every 1 L of water)

Using a pressure washer or other mechanical sprayer, apply the product solution at an application rate of 300 mL/m2

Farm Equipment Disinfection

Dilution Rate

Application

Routine cleaning and disinfection of movable farm equipment

1:100 (10 g of the product to every 1 L of water)

Using a brush or pressure washer, wash all equipment in the product solution until visibly clean

Water System Disinfection

Dilution Rate

Application

Terminal Disinfection

1:200 - 1:100

Isolate header tank at the mains and drain off to drinker points farthest from tank. Clean out any gross soiling and debris. Refill with water and add the appropriate volume of the product powder, thoroughly stir and leave for 10 minutes. Flush system through to all drain-off points and leave for a further 50 minutes before draining system and refilling with clean water.

Continuous Disinfection

1:1000

Dose header tank as required or apply through water system dosing equipment.

Disinfection

Dilution Rate

Application

Routine Disinfection of Footwear

1:100 (10 g of the product to every 1 L of water)

Replace solution once it has either become soiled or after a period of 4-5 days.

Aerial Disinfection

Dilution Rate

Application

Misting/Aerial Spray

1:200

Using either a pressure washer or knapsack sprayer on its finest mist setting and apply at 1 L of the product  solution per 10 m2 of floor space.

Cold Fogging

1:100

Use a mechanical mister to apply the the product solution at a rate of 1 L per 10 m2 of floor space.

Thermal Fogging

1:25 (4%) solution of the product in an 85:15 water the product Fog Enhancer mixture

Using a thermal fogging machine apply the prepared solution at 1 L per 40 m2 of floor space.